Azoteq CT002-S Programming Socket
Azoteq CT002-S Programming socket is a universal and memory based programming interface used for programming capacitative touch sensors in TSOT23-6 package. This programmer operates at a supply voltage range from 3.3V to 5V. The CT002-S socket Printed Circuit Board (PCB) comes with a 6-pin Zero Insertion Force (ZIF) socket, required circuitry, and CT210A-S programmer interface connector. The CT002-S depends on the CT210A-S device for setting one-time programmable bit options that are not reprogrammable. Typical applications include evaluation and small volume pre-production runs using devices like IQS127D, ISQ128, IQS211/A, IQS227AS, IQS228AS, and IQS231A.
Features
Dedicated TSOT23-6 programming socketSuitable for all TSOT23-6 standalone devicesUniversal and memory based programmerFor use with CT210A-S USB programming deviceLEDs for output evaluation after programmingZIF socket for access to one-time programmable optionsCompatible with Azoteq PC software (USBProg)3.3V to 5V supply voltage range
Azoteq Newest
Azoteq IQS223 ProxSense® Proximity/Touch Controller is a 3-channel self/projected capacitive proximity and touch controller offering high-performance sensitivity, signal to noise ratio, & power consumption.
Date: 2019-09-03Azoteq IQS620AEV01 & IQS620AEV04 Evaluation Kits are designed to facilitate faster project development with the IQS620A ProxFusion® Sensor IC.
Date: 2019-08-28Azoteq IQS223EV01 and IQS223EV02 Evaluation Kits enable demonstration & evaluation of the proximity and touch functions of the IQS IQS223 ProxSense Proximity/Touch Controller.
Date: 2019-08-28Azoteq IQS624/5EV04-S Sensor Evaluation Board is specifically designed for the evaluation of IQS624 and IQS625 ProxFusion® ICs.
Date: 2019-01-31Azoteq IQS625 ProxFusion IC is a multifunctional capacitance and Hall-effect sensor designed for applications where any or all of the technologies may be required.
Date: 2019-01-31Azoteq IQS62x and IQS680 ProxFusion® Passive Infrared (PIR) Sensors can operate via I2C protocol and enable motion-sensing features for various applications and devices.
Date: 2018-11-22Azoteq IQS680 Evaluation Board is specifically designed for the evaluation of IQS680 combination proximity sensor and is now available at Mouser.
Date: 2018-06-28Azoteq CT002-S Programming socket is a universal and memory based programming interface used for programming capacitative touch sensors in TSOT23-6 package.
Date: 2018-06-26