Xilinx Virtex®-7 FPGA VC7215 Characterization Kit
Xilinx Virtex®-7 FPGA VC7215 Characterization Kit provides the hardware environment for characterizing and evaluating 80 GTH (13.1Gbps) transceivers of the onboard Virtex-7 V690T FPGA. The VC7215 allows evaluation of the Integrated Bit Error Ratio Test (IBERT) demonstration using the Vivado design suite. Each GTH Quad and its associated reference clock are routed from the FPGA to a connector pad which is designed to interface with a Samtec BullsEye connector. A cable enabled with a BullsEye connector and 10 standard SMAs allows users to connect to a broad range of evaluation platforms, from backplanes and optical evaluation boards to high-speed test equipment. Each BullsEye connector handles a full GTH Quad, four transmit/receive pairs as well as the two independent reference clocks, enabling the highest level of flexibility in testing custom applications.
Features
Hardware environment for characterizing and evaluating 80 GTH (13.1Gbps) transceivers on the Virtex-7 V690T FPGAsHardware, design tools, IP, and pre-verified reference designsIntegrated Bit Error Ratio Test (IBERT) reference designSystem ACE™ SD controllerExpand I/O with 3 FPGA Mezzanine Card (FMC) interface
Kit Contents
Three SD cards labeled IBERT #1, IBERT #2, and IBERT#3 containing the IBERT demonstration designsOne Samtec BullsEye cableEight SMA female-to-female (F-F) adaptersSix 50Ω SMA terminatorsTwo GTH transceiver power supply modules (installed on board)SuperClock-2 module, Rev 1.0 (installed on board)
Xilinx Newest
Xilinx Zynq UltraScale+ RFSoC ZCU1275 Characterization Kit provides everything you need to characterize and evaluate the Zynq UltraScale+ XCZU29DR-2FFVF1760E RFSoC.
Date: 2019-07-12Xilinx UltraScale™ FPGA KCU1250 Characterization Kit provides everything you need to evaluate the 20 GTH 16.3Gbps transceivers available on the UltraScale XCKU040-FFVA1156 FPGA.
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7203 Characterization Kit provides the hardware environment for characterizing and evaluating 28 GTX (12.5Gbps) transceivers of the onboard Virtex-7 V485T FPGA.
Date: 2019-07-12Xilinx FMC XM104 Connectivity Card is designed to provide access to eight serial transceivers on the FMC HPC connector found on Xilinx FMC-supported boards including Virtex®-6 ML605.
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7215 Characterization Kit provides the hardware environment for characterizing and evaluating 80 GTH (13.1Gbps) transceivers of the onboard Virtex-7 V690T FPGA.
Date: 2019-07-12Xilinx AMS101 Evaluation Card is part of the Analog Mixed Signal Evaluation Platform which allows testing of the Xilinx Analog-to-Digital Converter and Analog Mixed Signal technology.
Date: 2019-07-12Xilinx Virtex® FPGA VCU1287 Characterization Kit provides everything you need to characterize and evaluate the 32 GTH and 32 GTY transceivers available on the Virtex® UltraScale™ XCVU095-FFVB2104E FPGA
Date: 2019-07-12Xilinx Virtex®-7 FPGA VC7222 Characterization Kit provides the hardware environment for characterizing and evaluating the GTH and GTZ transceivers available on the Virtex-7 XC7VH580T-G2HCG1155E FPGA.
Date: 2019-07-12